With Unilock’s ever increasing focus on permeable pavers, Town Hall has been designed to satisfy both traditional and permeable installation methods while maintaining a historical worn and distressed appearance.
[wonderplugin_slider id=”58″]
Applications
Borders & Accents
Commercial Vehicular
Pedestrian
Residential Vehicular
Technologies
EnduraColor™ Plus
EnduraColor Plus is the defining difference when it comes to superior wear resistance and color longevity. EnduraColor Plus is not a coating or secondary treatment, but rather a proprietary blended layer of nature’s highest performing minerals (which never fade) that have been embedded right into the surface of each stone during the manufacturing process. This ensures that the surface will not fade, crack, peel or delaminate, and the beauty of your project will last a lifetime.
Reala™ Surface Technology
Ultra-realistic textures cast from actual natural stone, brick and cobblestones.
Ultima™ Concrete Technology
For heavy traffic loads, this proprietary manufacturing process creates pavers and walls with up to 4 times the strength of poured concrete.
Surface Texture
Timeworn
Unit Thickness | Sq. Ft. Bndl. | Sq. Ft. Layer | Layers Bndl. | Ln Ft Bndl. Soldier | Units Sq. Ft. | Lbs Bndl. | Lbs Sec. | Units Bndl. | |
Standard – Full Bundle | 6.99 | 88.41 | 11.05 | 8 | 108.8 | 3.62 | 2913 | 364 | 320 |
Standard – Half Bundle | 6.99 | 44.2 | 11.05 | 4 | 54.4 | 3.62 | 1456 | 364 | 160 |
Town Hall™ Old Oak, Burgundy Red, Burnt Clay Blend – Sold Separately/Blended on Site
Town Hall™ Heritage Red, Heritage Clay, Basalt Blend – Sold Separately/Blended on Site
Additional Town Hall™ Information
Sold in full or half bundles only on a refundable skid. All measurements are nominal. Important: Textured surfaces require a buffer between the plate compactor and the paver surface to prevent scuffing. Take extra care when using Polymeric Sand with this product. Call for more information.
Base Requirement & Bedding Course – standard or open graded paver base specification.
Handling & Installation – A protective pad is required when doing the final paver compaction. Install from multiple pallets forbest color distribution.
Accent compatibility
- all paver applications and can be used as a wall accent.
Jointing Material and Joint Stabilization
- Good: Ordinary dry joint sand stabilized by a water-based or solvent based joint sand stabilizer sealer
(for impervious installations only)
- Better:
o Non- pervious – Unicare Polymeric Sand, Techniseal RG+, Alliance XP
o Permeable – Select graded stone chips
- Best:
o Non- pervious – Alliance Sand – Eurostone or Polymeric Sand MAX
o Permeable – Unilock EasyPro Joint Compound
o Overlays – Alliance Gator Maxx Polymeric Sand
Note:
o Polymeric sand is often installed too high in the joint. Ensure the sand level is lower than the paver surface to allowfor a three dimensional appearance.
Sealers
- Product may be sealed but it is not absolutely required
- sealers generally decrease the slip resistance of a product
- Unilock Unicare, Surebond, BP Pro and Techniseal sealers can be used.
- Semi-gloss sealers will still appear glossy on this product. Please test a stone to ensure the desired effect.
- Product must be cleaned before sealing
Cleaners – Any paver cleaner from Unilock, Techniseal, Surebond or BP- Pro is acceptable.
Special note: Other than overlay on concrete stoops and steps, you should have a bedding layer between the pavers and the poured concrete surface to avoid issues with height variance
All measurements are nominal
Colors, product data, and availability are subject to change without notice. Please confirm all details with your local Unilock Dealer or call 1-800-UNILOCK (1-800-864-5625) for availability in your area. The colors shown should only be used as a guide. Final color selections should always be made from actual samples.