Old world charm. New age technology.
The modern yet elegant look of Copthorne will add a touch of class to any landscaping project. With an average compressive strength rating of up to 4 times the strength of conventional poured concrete, Copthorne is a virtually indestructible paver that will not split, crack or fade.
Shapes & Sizes
20 cm x 6.35 cm x 6.033 cm
7.87″ x 2.50″ x 2.38″
Belpasso features EnduraColor™ Plus, a proprietary blended layer of nature’s highest performing minerals that never fade. It virtually outperforms any other paver surface when it comes to surface wear, color retention and its ability to repel even the nastiest staining substances. Choosing Belpasso, with EnduraColor Plus, will ensure your patio, driveway, outdoor kitchen or pool deck will look like new, even after years of wear and tear.
Learn About Copthorne
Copthorne Torture Test
Borders & Accents
EnduraColor Plus is the defining difference when it comes to superior wear resistance and color longevity. EnduraColor Plus is not a coating or secondary treatment, but rather a proprietary blended layer of nature’s highest performing minerals (which never fade) that have been embedded right into the surface of each stone during the manufacturing process. This ensures that the surface will not fade, crack, peel or delaminate, and the beauty of your project will last a lifetime.
Reala™ Surface Technology
Ultra-realistic textures cast from actual natural stone, brick and cobblestones.
Ultima™ Concrete Technology
For heavy traffic loads, this proprietary manufacturing process creates pavers and walls with up to 4 times the strength of poured concrete.
|Sq. Ft. Bndl.
|Sq. Ft. Layer
|Ln Ft Bndl. Soldier
|Units Sq. Ft.
|Standard – Full Bundle
|Standard – Half Bundle
Copthorne® Old Oak, Burgundy Red, Burnt Clay
Sold Separately/Blended on Site
Additional Copthorne® Information
Sold in full bundles only on a refundable skid (except specific areas of NY where half bundles are also available). Important: Textured surfaces require a buffer between the plate compactor and the paver surface to prevent scuffing.Take extra care when using Polymeric Sand with this product. Contact Unilock for information.
Base Requirement & Bedding Course – standard paver base specification
Handling & Installation – A protective pad is required when doing the final paver compaction. Be sure to offset joints forbest appearance. Cutting is seldom required if you are installing a curvilinear walkway. Minimum radius 6 feet for curvedapplications. Install from multiple pallets for best color distribution.
- all paver applications and as accents in walls
Jointing Material and Joint Stabilization
Good: Ordinary dry joint sand
- Better: Unicare Polymeric Sand, Techniseal RG+, Alliance XP
- Best: Ordinary dry joint sand stabilized by a water-based or solvent based joint sand stabilizer (joint sand stabilizersealer may make the surface slightly slippery).
o Polymeric sand is often installed too high in the joint. Ensure the sand level is lower than the paver surface to allowfor a three dimensional appearance.
o Alliance Gator Maxx Polymeric Sand is recommended for concrete overlays.
- Product may be sealed but it is not absolutely required
- Sealers generally decrease the slip resistance of a product
- Unilock Unicare, Surebond, BP Pro and Techniseal sealers can be used.
- Semi-gloss sealers will still appear glossy on this product. Please test a stone to ensure the desired effect.
- Product must be cleaned before sealing
Cleaners – Any paver cleaner from Unilock, Techniseal, Surebond or BP- Pro is acceptable.
Special note: Other than overlay on concrete stoops and steps, you should have a bedding layer between the pavers and the poured concrete surface to avoid issues with height variance
All measurements are nominal
Colors, product data, and availability are subject to change without notice. Please confirm all details with your local Unilock Dealer or call 1-800-UNILOCK (1-800-864-5625) for availability in your area. The colors shown should only be used as a guide. Final color selections should always be made from actual samples.